Delta VP3000 Series - Page 59

Chapter 2 Mechanical Installation｜VP3000
50
Frame D–E OPEN Type
Applicable models: VFD045–090VP43ANTCA
1. Fasten the metal plate on the AC motor drive, as shown in the figure below.
Frame
Screw Spec. and Torque
D–E
M4 14–16 kg-cm / (12.2–13.9 lb-in.) / (1.37–1.57 Nm)
Figure 2-67
2. Choose the applicable Ohm clips according to the wire gauge and fasten it on the metal plate.
Frame
Screw Spec. and Torque
D–E
M4 14–16 kg-cm / (12.2–13.9 lb-in.) / (1.37–1.57 Nm)
Figure 2-68