Delta VP3000 Series - Page 604

Chapter 8 Troubleshooting｜VP3000
595
ID No.
Fault Name
Descriptions
214
Power-on process
initialization time-out
(POTO)
Power-on process initialization time-out
Action and Reset
Action Condition
Initialization detection time-out
Action Time
Immediately act
Fault Treatment Parameter
No
Reset Method
No
Reset Condition
No
Record
Yes
Cause
Corrective Actions
Malfunction caused by
interference
Verify the wiring of the control circuit and wiring/grounding of the main circuit to
prevent interference.
Hardware failure
Check if other error code occurs after cycling the power. If yes, return to the
factory for repair.