Manuale operativo
CHORUS
22 Rev. 0 del 06/2012
fig. 11
After removing the strip of wood, the
polyethylene protections can be removed as well
fig.12
At this point the ply-wood box can be taken
down, unscrewing the four screws positioned
low on the four sides on the bottom.
fig. 13
Once the CHORUS instrument has been taken
out of the box, it can be positioned on the
working table.
ATTENTION
The operation has to be performed by two persons, using both hands. The handle positioned on the
bottom has to be held with one hand, use the other hand to hold the central part of the instrument.
Do not use only one hand, since the instrument might lose its balance.