Control 24 Reference Guide110
Flip Mode Applications
Cue/headphone mixes These are often built us-
ing one or more send busses. In practical use, es-
pecially during tracking, engineers must fre-
quently button back and forth between their
control room mix and one or more (discrete)
cue or headphone mixes to satisfy requests from
talent during the recording process. By enabling
Flip mode for the cue mix send, levels in the
headphones can be adjusted quickly using the
faders. All Flip mode controls are fully automat-
able for even greater control over submixes.
Stems Complex paths can be built using multi-
ple send busses, aux inputs and Master Faders
(for examples, see “5.1 Track Layouts, Routing,
and Metering” on page 52). The channel send lev-
els, that determine the mix heard in each stem
buss, can be quickly set from the faders using
Flip mode. Complex automation is greatly sim-
plified through the use of Send Flip mode.
Control_24.book Page 110 Wednesday, January 17, 2001 2:51 AM
To Next Page
Loading...
Need help?
General
