Control 24 Reference Guide78
Editing Groups
You can only edit one group at a time.
To view or edit a group:
1 Press EDIT.
2 Select a group to edit.
3 Use the SELECT button to add or remove
members from the group.
4 Press EDIT again to confirm your selection, or
ESC/CANCEL to cancel.
Suspending Groups
The SUSPEND groups button enables all groups
to temporarily be disabled.
To suspend all groups:
■ Press the SUSPEND button. The correspond-
ing LED will flash to indicate that all groups are
disabled.
To exit Group Suspend mode:
■ Press the SUSPEND button again. All channel
strips return to their former group states.
Deleting Groups
Groups can be deleted individually, or all at
once.
To delete groups individually:
1 Press Groups/Delete
2 Select a group.
3 Press Enter on the numeric keypad or
ESC/CANCEL to cancel.
Deleting All Groups
To delete all groups in a session:
1 Press Groups/Delete
2 Select any group while pressing the (CTL)
button.
3 Press Enter on the numeric keypad or
ESC/CANCEL to cancel.
Note that group delete cannot be undone.
Control_24.book Page 78 Wednesday, January 17, 2001 2:51 AM
To Next Page
Loading...
