Control 24 Reference Guide88
Link/Unlink Edit and Timeline
To link or unlink the Edit and Timeline selections
from Control 24:
■ While pressing SHIFT/ADD, press slash (/) on
the numeric keypad.
Window Navigation Key
Commands
The following key commands are active in all
three of the modes (NAV, ZOOM and SEL ADJ):
(CTL)+PREVIOUS = page left 1 page (equiva-
lent to Option-page-up).
(CTL)+NEXT = page right 1 page (equivalent to
Option-page-down).
(CTL)+UP = page up 1 page (equivalent to
page-up).
(CTL)+DOWN = page down 1 page (equivalent
to page-down).
(CTL)+OPT(ALT) ALL+PREVIOUS = page left all
the way (equivalent to option-home).
(CTL)+OPT(ALT) ALL+NEXT = page right all the
way (equivalent to option-end).
(CTL)+OPT(ALT) ALL+UP = page up all the way
(equivalent to home).
(CTL)+OPT(ALT) ALL+DOWN = page down all
the way (equivalent to end).
Shuttle Mode Shortcuts
To engage Shuttle mode for the numeric keypad:
1 Choose Setups > Preferences > Operations.
2 Enable the Shuttle mode Numeric Keypad op-
tion.
When Shuttle is the selected numeric keypad
shortcuts mode, the following tasks may be ini-
tiated from the keypad on Control 24:
Task NUMERIC KEYPAD
1x Forward 6
1x Reverse 4
4x Forward 9
4x Reverse 7
1/4x Forward 3
1/4 x Reverse 1
1/2 x Forward 5-6
1/2x Reverse 5-4
2x Forward 8-9
2x Backwards 8-7
1/16x Forwards 2-3‘
1/16x Backwards 2-1
Loop Play Edit Selection 0
Enter Main Counter asterisk (*)
Enter/Edit Time Fields backslash (/)
Capture TimeCode =
Create Memory Location ENTER
Nudge later by grid +
Nudge earlier by grid -
Control_24.book Page 88 Wednesday, January 17, 2001 2:51 AM
To Next Page
Loading...
