DigiDesign Control 24 Reference Guide

Control 24 Reference Guide82
Memory Locations and
Markers
Control 24 supports all Pro Tools Memory Loca-
tions and Markers features.
To display the Memory Locations window:
■ Press MEM LOC in the WINDOW section.
Creating and Defining Memory
Locations
To define a memory location:
1 Press ENTER. The New Memory Location win-
dow appears.
2 Set properties for your marker/memory loca-
tion with the numeric keypad or alpha-numeric
keyboard.
3 Press ENTER to save the new memory loca-
tion.
To define a memory location to a specific
numerical address:
■ Enter a decimal, a number key (or keys), then
press ENTER.
If available, a memory location will be assigned
to that number/address.
To recall a memory location:
■ Enter a decimal, then a number, then a deci-
mal.
– or –
■ Click on the desired memory location button
in the Memory Locations window.
To delete a memory location
■ Click a memory location in the Memory Loca-
tions window, while pressing OPT(ALT)/ALL.
To delete all memory locations:
Click any memory location in the Memory Lo-
cations window, while pressing
OPT(ALT)/ALL+SHIFT/ADD. This can be un-
done with UNDO.
To edit a memory location:
■ Double-Click the location in the Memory Lo-
cations window. This enables you change set-
tings for the memory location as well as “move”
the marker/memory location from its original
location to the current playback/insertion
point.
Control_24.book Page 82 Wednesday, January 17, 2001 2:51 AM

DigiDesign Control 24 Specifications

General

Channels	24
Faders	24 motorized 100mm faders
Connectivity	Ethernet
Compatibility	Pro Tools
Audio Interface	No built-in audio interface
EQ	4-band EQ per channel
MIDI I/O	Yes
Footswitch I/O	Yes
Power Supply	Internal