Control 24 Reference Guide64
In addition to the above, there are several mod-
ifier shortcuts for transport function:
• OPT(ALT)/ALL+PLAY: engages Pro Tools Pause
mode.
• SHIFT/ADD+PLAY: initiates half-speed play-
back.
• SHIFT/ADD+STOP: cancels the current record
pass.
• SHIFT/ADD+FAST FORWARD: Go-To-End.
• SHIFT/ADD+REWIND: returns to zero (RTZ).
• CTL/CLUTCH+RECORD: cycles through the
various record modes (normal, QuickPunch,
Loop).
• CTL/CLUTCH+PLAY: cycles through playback
modes.
• CTL/CLUTCH+EXT TRANS: cycles through
available machine master choices, (such as
Pro Tools, Serial Machine, and ADAT).
• OPT(ALT)/ALL+IN or OUT: centers the left or
right side of any current on-screen waveform
selection in the Edit Window.
• (CTRL)+IN or OUT: enter mode for pre-roll
and post-roll.
Loop Functions
There are two dedicated buttons to control loop-
ing functions: Loop Playback and Loop Record.
LOOP PLAYBACK toggles Loop Playback on or
off (LED is lit when Loop Playback is enabled).
LOOP RECORD toggles Loop Record on or off
(LED is lit when Loop Record is enabled).
Audition Control Section
Directly above the five transport special func-
tion buttons is another row of five buttons that
comprise the audition control section.
AUDITION determines the function of the next
four buttons in this section. When the AUDI-
TION button’s LED is lit, you are in Audition
mode.
PRE ROLL, IN, OUT and POST ROLL function dif-
ferently in each mode:
• In standard mode (AUDITION button is off),
they activate pre/post roll (PRE and POST) and
define in/out points during playback (IN and
OUT).
• In Audition mode (AUDITION button is lit)
these four buttons each audition a unique
range of audio in and around the current Edit
selection. See “Audition Mode Functions” on
page 65.
Pre and Post-Roll
To toggle Pre- or Post-roll on/off:
1 Make sure AUDITION is off.
2 Press PRE or POST to toggle each on or off.
Audition Control Section
Control_24.book Page 64 Wednesday, January 17, 2001 2:51 AM
To Next Page
Loading...
Need help?
General
