DigiDesign Control 24 Reference Guide

Control 24 Reference Guide76
DEFAULT QuickMode Button
This button reverts a control to its default set-
ting, and is equivalent to pressing
OPT(ALT)/ALL and clicking an on-screen con-
trol in Pro Tools.
To reset a fader to its default setting:
■ While pressing the DEFAULT button, press
any channel’s SELECT button.
To reset all faders or encoders to their default
setting:
■ While pressing DEFAULT+APPLY TO ALL
CHANNELS, press any channel’s SELECT but-
ton.
– or –
■ While pressing DEFAULT+OPT(ALT)/ALL,
press any channel’s SELECT button.
To reset all selected faders or encoders to their
default setting:
■ While pressing DEFAULT+APPLY TO ALL SE-
LECTED CHANNELS, press any channel’s SE-
LECT button.
– or –
■ While pressing DE-
FAULT+OPT(ALT)/ALL+SHIFT/ADD, press any
channel’s SELECT button.
To remove a selected plug-in:
■ In Insert Assign mode, while pressing DE-
FAULT, press the encoder button beneath a
plug-in’s name to remove it.
The GROUPS Section
One of the most powerful features of Pro Tools
is its extensive grouping capability. Control 24
lets you take full advantage of this capability by
providing dedicated buttons for Group func-
tions.
The GROUPS section contains five Group but-
tons—CREATE, ENABLE, EDIT, DELETE and
SUSPEND. These buttons mirror Pro Tools
Group menu commands, enabling you to use
Control 24 to perform all the following
Pro Tools Group functions:
• Create new groups, and query current groups
to see if the selected channels are resident in
any existing groups.
Control_24.book Page 76 Wednesday, January 17, 2001 2:51 AM

DigiDesign Control 24 Specifications

General

Channels	24
Faders	24 motorized 100mm faders
Connectivity	Ethernet
Compatibility	Pro Tools
Audio Interface	No built-in audio interface
EQ	4-band EQ per channel
MIDI I/O	Yes
Footswitch I/O	Yes
Power Supply	Internal