DigiDesign Control 24 Reference Guide

Control 24 Reference Guide38
Preamp Outputs
To connect a preamp output to Pro Tools:
■ Connect the line level output of each preamp
to the corresponding inputs on your Pro Tools
audio interface.
You might want to route the preamp numbers
to the corresponding input numbers on a
Pro Tools audio interface.
For more flexibility, it is recommended that you
connect these preamps to a patch bay that will
enable you to make connections and configura-
tions with more flexibility than would “hard-
wiring” preamp channels to Pro Tools audio in-
terface channels.
Control_24.book Page 38 Wednesday, January 17, 2001 2:51 AM

DigiDesign Control 24 Specifications

General

Channels	24
Faders	24 motorized 100mm faders
Connectivity	Ethernet
Compatibility	Pro Tools
Audio Interface	No built-in audio interface
EQ	4-band EQ per channel
MIDI I/O	Yes
Footswitch I/O	Yes
Power Supply	Internal