I don’t hear playback from USB 3-4.
• Playback is only available on USB 1-2. USB 3-4 is used for additional track
recording – like dry guitar, mic, drums, etc.
I only get sound on one side of the recording.
• Locate the Mono/Stereo box at the bottom of each track and make sure the mono
tracks are set to mono and the stereo tracks are set to stereo.
When I export my song to a Wave file my CD burning program says the file type is not
recognized as a Wave file.
• Make sure when you export the audio that you choose 16 bit not 24.
Using a Mac to receive audio stream from the GNX3000, the Mac USB input and
output is visible, but so is the PC selection. Can these be removed?
• The PC audio will work on a Mac. However some Mac applications can’t select
more than one audio device and thus those applications must use the Mac device to
record all 4 channels.
GNX3000 Owner’s Manual
127
GNX3000 Owner’s Manual
To Next Page
Loading...
