GNX3000 Owner’s Manual
15
GNX3000 Owner’s Manual
HyperModel™ Amp Dump, MIDI Mapping, MIDI Merge, USB Mode and Factory
Reset
(see the Utilities section on page 118).
AMP SAVE - This button stores Amp and Cabinet changes (tone, gain, level, amp
type, cabinet type, warp, EQ or cabinet tuning) as HyperModels
TM
.
STORE - This button is used to save Preset edits to the User Presets bank.
(STOP/PLAY) DRUMS - This button is used to turn the General MIDI
Drum Machine on and off. See page 99 for a list of drum patterns and page 128
for a list of samples.
PATTERN - Pressing this button and using the DATA WHEEL selects Drum
machine patterns.
LEVEL - Pressing this button and using the DATA WHEEL adjusts the Drum
Machine output level.
TEMPO - Pressing this button and using the DATA WHEEL adjusts the Drum
Machine.
SHIFT - When this button is lit, the secondary functions labeled below each
button are now active.
USB 1-2 SRC - Selects what input sources are to be recorded up the USB 1-2
channels.
USB 3-4 SRC - Selects what input sources are to be recorded up the USB 3-4
channels.
MIC - Selects the Mic Input Routing menu and how the mic signal is routed
through the GNX3000’s effects processing for both recording and live
performance.
LINE - Selects the Line Input Routing menu and how both LINE INPUTS are
routed through the GNX3000’s effects processing for both recording and live
performance.
USB 1-2 LVL - A gain/attenuation control to optimize the level of sources
being recorded up the USB 1-2 channels.
USB 3-4 LVL - A gain/attenuation control to optimize the level of sources
being recorded up the USB 3-4 channels.
GNX3000 Owner’s Manual
15
GNX3000 Owner’s Manual
To Next Page
Loading...
Need help?
General
