Dräger Perseus A500 - Displaying Mini-Trends; Displaying Alarm Limits and Units of Measurement; Adjusting the Sweep Speed and the Scale

Instructions for use Perseus A500 SW 2.0n 107
Operation
Displaying or deleting reference loops
 To save a reference loop, touch the Save ref.
button (C).
Or
 To delete the reference loop, touch the Delete
ref. button (D).
These buttons are alternatively displayed in the
Quick setup window.
Displaying mini-trends
Mini-trends (B) can be displayed for the
waveforms (A).
1 Open the Views dialog window.
2 Touch the Mini-trends button.
Larger and more detailed graphic and numeric
trend displays, see page 109.
Displaying alarm limits and units of
measurement
The alarm limits and the units of measurement can
also be displayed in the waveform and parameter
fields.
1 Open the Views dialog window.
2 Touch the Limits & units button.
Adjusting the sweep speed and the
scale
1 Open the System setup dialog window.
2 Touch the Screen layout > Waveforms
tab (A).
Setting the sweep speed
 Touch button (B). Set the sweep speed.
Adjusting the waveform scale
 To change the waveform scale, touch one of
the buttons (C) and select the value.
1047710478
A
B
10485
A
B
C
C
C
C
C
A
System setup