Dräger Perseus A500 - Overview of the menu structure

Annex
282 Instructions for use Perseus A500 SW 2.0n
Overview of the menu structure
The following tables list the grouped buttons of the
main menu bar with the resulting dialog windows
of the same name and the tabs. For information on
operation, see "Operating concept" on page 39.
Group
Button in main menu
bar
Horizontal tab Vertical tab Description
Alarms... Limits Displaying or changing alarm limits
Current alarms Displaying information on active
alarms
Alarm history Viewing the alarm history
Settings Setting the alarm tone volume
Activating or deactivating CO2 alarms
1)
Switching CBM mode on or off
1)
1) Only during operation, not in Standby mode
CO2 alarms off
1), 2)
2) Only in the modes: Manual / Spontaneous, Ext. FGO, Pause
Deactivating CO2 alarms
Autoset limits
1), 3)
3) Only in the modes: PSV, PC, PC - APRV (optional), VC - CMV / AutoFlow, VC - CMV
Automatically adapts alarm limits to
current measured or set values
Exit CBM
1), 4)
4) Only in CBM mode
Exit CBM mode
Group
Button in main menu
bar
Horizontal tab Vertical tab Description
Views...
1)
1) Only during operation, not in Standby mode
Switching to other configured views
Resetting current view to start settings
Displaying alarm limits, units, mini-
trends, and loops
View
1)
View
1)
View
1)
Switching between the 3 configured
views.
Export screenshot Exporting screenshots to USB flash
drive
123
123
123