Tests
126 Instructions for use Perseus A500 SW 2.0n
Completing the checklist
This section describes how the checklist is
processed, using as an example a device with an
electronic gas mixer and factory defaults.
The scope of the checklist can vary due to differing
system settings.
The instructions on the screen take precedence.
Prerequisites
1 Connect the hoses (A).
2 Seal the Y-piece (B).
3 Set the APL valve to 30.
4 Close all the flow control valves.
5 Set the O
2 switch to Aux. O2.
3187531876
3187831879
To Next Page
