Dräger Perseus A500 - Defining the Start Settings; Adjusting the Settings; System Setup > Screen Layout

Configuration
150 Instructions for use Perseus A500 SW 2.0n
Defining the start settings
As soon as a vertical tab is selected, entry of the
configuration password is required to access the
settings in the System setup dialog window.
For information on the configuration password, see
page 285.
Adjusting the settings
The following tables show all the setting
possibilities in the System setup dialog window.
The respective factory settings are marked in bold
format.
System setup > Screen layout
Vertical tab "General"
Vertical tab "Views"
Headline/
Parameter
Setting range
Description
Color scheme Day light; Day dark; Night Set the color scheme, see page 43
Screen brightness 10 to 100
80
Set the screen brightness.
Headline/
Parameter
Setting range
Description
Rename views 1 Standard; 2 Expert; 3 Expert Specify names for screen layouts.
Touch the button with the respec-
tive screen layout, enter the new
name on the screen keyboard, and
confirm with the button or with
the rotary knob.
Number of wave-
forms (view 3)
3; 4
Default view 1Standard; 2 Expert; 3 Expert Specify the standard view.
Save as system
defaults
Current view
(only available during operation)
Save current screen layout.
All views Save all screen layouts.