Instructions for use Perseus A500 SW 2.0n 35
Overview
Data exchange, interfaces
Serial interfaces
Two serial interfaces, COM 1 and COM 2, are
provided for data communication using the
Dräger MEDIBUS data protocol.
USB interface
After a Dräger USB flash drive is connected, a
USB interface enables, e.g., the following actions:
– Saving screen content as screenshot
– Saving and loading device configurations
– Saving system test results or protocols (partly
optional) as text file
Network interface
If a corresponding service contract has been
obtained, the Dräger RemoteService function can
be executed via a network connection and the
hospital network.
Perseus can be connected to the
Dräger ServiceConnect Gateway or a
DrägerService computer.
If the connected network offers an NTP service,
the time on the device can be synchronized with
the time on the NTP server.
For more information, see "Connections to IT
networks" on page 253.
Infinity ID accessory support
– Exchange interval monitoring
– Anti-interchange security for breathing hoses
For more information, see page 269.
To Next Page
Loading...
