Instructions for use Perseus A500 SW 2.0n 13
For your safety and that of your patients
Essential performance
General
– Supply of the anesthesia workstation with O
2:
If the O
2 supply (central gas supply or gas
cylinder) fails, an alarm is issued.
– Supply of the patient with adequately
oxygenated breathing gas:
If the breathing gas contains insufficient levels
of O
2, an alarm is issued.
– Patients are not supplied with excessively high
anesthetic gas concentrations:
If excessively high anesthetic gas
concentrations are delivered, an alarm is
issued.
– Monitoring of the airway pressure:
Alarms are issued depending on the set alarm
limits.
Gas measurement
– Breathing gas monitoring:
Measurement of the gas composition with ISO
accuracy.
– Monitoring of the breathing gas concentrations:
If a set alarm limit is exceeded or the gas
measurement fails, alarms will be issued.
Handling Infinity ID components
Ownership or purchase of this medical device with
RFID technology only includes the right to use the
medical device and RFID technology in
conjunction with products approved by Dräger and
in strict compliance with these instructions for use.
No intellectual property rights or any rights to the
use of the medical device or RFID technology are
hereby granted, either explicitly or implicitly, which
are contrary to the above-mentioned conditions.
To Next Page
Loading...
