Dräger Perseus A500 - Creating Additional Logbook Entries; Resetting User-Specific Settings

Instructions for use Perseus A500 SW 2.0n 115
Operation
Creating additional logbook entries
The following events can create logbook entries
with measured values for the parameters etCO
2,
MV, Pmean, PIP, Pplat, PEEP, FiO
2, exp.
concentration of the primary anesthetic gas, and
etN2O:
– Adjustable time intervals
– Alarms with high or medium priorities
1 Open the System setup dialog window.
2 Touch the System > Logbook tab (A).
3 Touch the corresponding button (B).
Resetting user-specific settings
Changes made in the System setup dialog
window during operation can be reset to the start
settings.
1 Open the System setup dialog window.
2 Open the corresponding dialog window.
3 Touch the System defaults button and
confirm.
10486
A
A
B
System setup