Dräger Perseus A500 - Inserting the Breathing System

Assembly and preparation
66 Instructions for use Perseus A500 SW 2.0n
Mounting the CLIC adapter (optional)
The CLIC adapter allows the following disposable
CO
2 absorbers to be used:
– Infinity ID CLIC Absorber 800+
– CLIC Absorber 800+
– Infinity ID CLIC Absorber Free
– CLIC Absorber Free
1 Remove the cleaning plate from the adapter.
2 Close the adapter so that it engages.
3 Pay attention to the correct orientation of the
adapter: The two bypass symbols (N) must
align in a vertical line.
4 Screw on the CLIC adapter.
Inserting the breathing system
1 Insert the assembled breathing system (A)
vertically into the breathing system mount.
2 Lock the inserted breathing system: Turn the
middle lever (B) clockwise about 120°.
3 Set the breathing system cover (C) into place
and click it into position.
1039210363
N
A
1036610364
B
C