Instructions for use Perseus A500 SW 2.0n 285
Password
Password
Configuration password for Perseus A500 Software 2.0n
Cut-out from the instructions for use Perseus
A500 Software 2.0n
To prevent unauthorized alteration, the start
settings for Perseus A500 are protected by the
following configuration password:
Information for the configuration
password
To prevent unauthorized alteration, the start
settings for Perseus A500 are protected by a
password with 0 to 8 digits. Information on the start
settings, see page 150.
The configuration password appears on this page
of the instructions for use. Cut out the area with the
password and keep in a place which is safe from
access by unauthorized persons.
The configuration password can only be reset by
specialized service personnel.
0000
To Next Page
Loading...
