Dräger Perseus A500 - Display on the Screen; Protocoling; Gas Supply; Gas Scavenging

Overview
34 Instructions for use Perseus A500 SW 2.0n
Display on the screen
Perseus can display the following:
– Waveforms
– Graphical trends
– Numeric trends
– Loops
– Alarm history
– Logbook
– Numeric parameters
– Prediction of the FiO
2 concentration (optional)
– Prediction of the anesthetic gas concentration
(optional)
– Pre-configured lists for measured values and
set values
Protocoling
Among other things, Perseus can save the
following data in a logbook:
– Measured values
– Set values and their changes
– Patient data
– Ventilation modes
– Events (e.g., alarms, confirmed alarms, switch-
on time and switch-off time)
– Test results
– Gas consumption and anesthetic agent
consumption
Gas supply
Gas supply variants
Gas scavenging
Gas scavenging is conducted through the
integrated anesthetic gas receiving system (AGS).
The particle filter it contains filters the ambient air.
This ensures the display accuracy of the flow
indicator.
Gas
Central gas
supply
Gas cylinder connec-
tion with
O
2
Yes
permanently mounted
Dräger pressure
reducer (optional)
or
third-party pressure
reducer (via country-
specific NIST or DISS
connection)
Air permanently mounted
Dräger pressure
reducer (optional)
N
2O Yes (optional)