Instructions for use Perseus A500 SW 2.0n 217
Service
Inspection
Remote service
Perseus supports the following Remote Service
functions:
– Help ticket
– Remote Device Check
– Proactive call
Contact the responsible DrägerService
organization for further information on the Remote
Service function.
Safety checks
Safety checks are no substitute for preventive
maintenance measures (including preventive
replacement of wear parts) as identified by the
manufacturer.
Performing the safety checks
1 Check whether the corresponding instructions
for use are available in the correct version.
2 Perform a functional test of the following
functions in accordance with the instructions
for use:
– Emergency O
2 delivery
3 Check that the product is in good condition:
– All labels are complete and legible
– No visible damage to the following
components:
– Trolley and castors
– Housing parts
– Brakes
– Auxiliary power sockets
– Vaporizer mount
– Water trap mount
– O-rings of the water trap mount
– Screen
–Gas inlets
– Status display
– Breathing system
– AGS and AGS valves
– Hoses and cables
– Strain reliefs for AGS, compressed gas
hoses, cables
– Optional: Holding arms
– Optional: Flexibility trolley, castors, and
locking mechanisms
– Optional: Pressure reducers and their
sensor lines
– Fuses which are accessible from the
outside are in compliance with the specified
values
– Check that the country-specific labeling of
the gas type matches the screen display.
– Check the end stop of the holding arms for
patient monitors.
4 Check the electrical safety in accordance with
the IEC 62353 standard.
5 Check the safety equipment:
– Functional integrity of optical and acoustic
alarm generators
–O
2 switch on gas mixing unit (electronically
controlled gas mixer)
– Internal battery
– Optional: Check the function of the
minimum O2 delivery (mechanically
controlled gas mixer).
Measure Interval User group
Inspection and safety check Every 12 months Service personnel
To Next Page
Loading...
