4-57
CH 4/ Setup Monitoring
Loading data
from memory
(continued)
Action... Result...
• Press Delete to clear the
selected (highlighted) session
data file in the list. This will
remove the selected file from
memory.
• Press Delete All to clear all
session data files in the list.
This will remove all data files
from memory.
NOTE: All data files stored in
event memory will be lost
when you press Delete All.
Copy any files that you want to
save to a computer or USB
flash drive first before deleting
all files.
• Press Archive to USB to copy
and save data files from
internal memory to an external
USB device. Once the files
have been saved, you will need
the Dranetz Dran-View
®
program to retrieve and view
the files in your computer.
• Press Archive Locally to save
data files locally into the
instrument’s internal memory.
• Press Exit to return to Start
menu.
NOTE: When saving files to USB:
If the data file is open for active viewing, you
have to close the file first in order to archive or
save the file to the USB flash drive.
If the data file is open for active monitoring, you
have to first press stop monitoring, then view the
setup session file. Once the setup file has been
successfully recorded and events captured and
stored in memory, you can proceed to archive or
save the file to USB flash drive.
STEP 2: Once you open a session
data file, it will load and store it
into the instrument’s event and
trend memory, and becomes
available to be acted on by the
view data screen functions. Refer
to Chapter 6 View Event Data &
Reports for more information.
HDPQ-436
Shop for Power Metering products online at:
1.877.766.5412
www.PowerMeterStore.com
To Next Page
Loading...
