Programming
Operating Instructions 581 - 01.0 - 05/2016108
Start ref.
In the subitem Sta
rt ref. you can start a reference run.
With the aid of the reference run, you can perform basic machine
settings.
To start a reference run:
1. Select St
art ref.
2. Press the button.
St.cont.operat
In the subitem St
.cont.operat you can start a continuous run.
Before the start of sewing, a securi
ty prompt is first displayed,
which must be confirmed with Yes.
To start a continuous run:
1. Select St
.cont.operat.
2. Press the button.
To Next Page
