SHANGHAI ESURVEY GNSS CO., LTD.
76
Beep
o On: to enable the beep.
With it enabled, you can hear a sound after pressing each key.
o Off: to disable the beep.
Horizontal Incrementation
o Right: to set right horizontal incrementation for clockwise direction
measurement.
o Left: to set left horizontal incrementation for anti-clockwise direction
measurement.
Reticle Illumination
o On: to enable reticle illumination.
o Off: to disable reticle illumination.
You can also set it by Star key.
Auto-TP(Liquid crystal heating)
o On: to enable LCD heating. It helps normal working under cold conditions.
o Off: to disable LCD heating.
Auto-Off
o On: the instrument is powered off after 20 minutes without any action.
o Off: the instrument is powered on permanently.
This drains the batteries quickly.
Min. Reading
It is used to set the minimum reading of the angle:
o Angle unit DMS (DEGREE, MINUTE, SECOND): 0°00'01" / 0°00'05" /
0°00'10"
o Angle unit GON: 0.0005 gon / 0.001 gon / 0.0001 gon
o Angle unit MIL: 0.01 mil / 0.05 mil / 0.10 mil
o Angle unit DEGREE: 0.0005° / 0.001° / 0.0001°
Angle Unit
o DMS (degree sexagesimal): range: 0° ~ 359°59'59''
o GON: range: 0 gon ~ 399.999 gon
o MIL: range: 0 mil ~ 6399.99 mil
o DEGREE(degree decimal): range: 0° ~ 359.999°
The setting can be changed at any time, and will immediately take effective.
Distance Unit
o Meter
o US-ft: US-feet
o INT-ft: international feet
o ft-in1/16: US-feet-Inch-1/16 inch
Temperature Unit
o °C : degree Celsius
o °F : degree Fahrenheit
Pressure Unit
o hPa: Hecto Pascal
o mbar: Millibar
o mmHg: Millimeter mercury column
o inHg: Inch mercury column
Code Record
o RecBefore: codeblock is saved before the measurement.
o RecAfter: codeblock is saved after the measurement.