ECKELMANN Case Controller UA 4 E Series - Intended Use

Firmware V3.13
21.04.2021
14/466
2.3 Intended use
Thiscontrolsystemmayonlybeusedforthepurposeforwhichitisintended:TheUA401ECC/UA400E
CC/UA410EACcontrolsystemhasbeendesignedforuseascasecontrollerincommercialandindustrial
refrigerationsystemswiththeintendedfunctionalscopeasdescribedintheseoperatinginstructions,anditisto
be used under the environmental conditions in these instructions.
Read the safety instructions and the instructions for installation and putting into service, operation and
maintenance. THEN start the commissioning and/or operation of the machine / system.
The safety and functionality of the machine / system are only guaranteed for this intended application.
Never use the machine / system, its components, control components or parts for any other purpose.
The system must not be put into operation until conformity with the applicable EU Directives has been
established for the entire system.