•
9.2.3 Menu 2 Setpoints UA 131 E LS
SETPOINTS POS: XXXXX
1 Cooling Move to menu 2-1;
Special case: When one-zone (tandem) operation is set (Menu 6-1) und setpoint
toggle is deactivated (Menu 3-3), Continue to 2-1-1
2 Defrost Move to menu 2-2;
Special case: When one-zone (tandem) operation is set (Menu 6-1) und setpoint
toggle is deactivated (Menu 3-3), Continue to 2-2-1
3 Not used with this controller type
4 Alarm Move to menu 2-4;
Special case: When one-zone (tandem) operation is set (Menu 6-1) und setpoint
toggle is deactivated (Menu 3-3), Continue to 2-4-1
5 Frame Heater Move to menu 2-5
6 Fans Move to menu 2-6
Menu 2-1 Cooling
COOLING POS: XXXXX
1 Zone 1 Move to menu 2-1-1
2 Zone 2 Move to menu 2-1-2
3 Zone 1T Toggle Move to menu 2-1-3; not shown when setpoint toggle is deactivated (Menu 3-3)
3 Zone 2T Toggle Move to menu 2-1-4; shown only when two-zone operation is set and when
setpoint toggle
is not deactivated (Menu 3-3)
To Next Page
Loading...
