ECKELMANN Case Controller UA 4 E Series - Naming of the Controller

Firmware V3.13
21.04.2021
139/466
•
•
6.4.1 Naming of the controller
The following parameters are available for naming the controller:
refrigeration point name (19 characters, can be freely edited)
refrigeration point position (5 characters, can be freely edited)
The controller can be named using the system centre, store computer, operator terminal or the PC software
LDSWin.
A.BT300operatorinterfaceTheinputismadeinMenu6-1.
B. System centre SeechapterSystem Centre.
C. Store computer / operator terminal The input is made in Menu 7-2.
D. PC software LDSWin See operating manual of LDSWin.
Any naming of the controller with a BT 300 x operator interface is only possible for the UA 410 L
controller
