ECKELMANN Case Controller UA 4 E Series - Menu 4 Messages UK 100 E

Firmware V3.13
21.04.2021
402/466
•
•
•
9.6.5 Menu 4 Messages UK 100 E
MESSAGES POS: XXXXX
1 View Move to menu 4-1 View Messages
2 Acknowledge Messaages in log are cancelled, press ESC to exit after cancel is confirmed
3 Delete Move to menu 4-3
Menu 4-1 View Messages
MESSAGES POS: XXXXX
Error text 1: Fault message Fault 1
dd.mm.yy hh:mm ON Start of Fault 1
dd.mm.yy hh:mm OFF End of Fault 1 (only when Fault 1 has ended)
...
Error text n: Fault message Fault n
dd.mm.yy hh:mm ON Start of Fault n
dd.mm.yy hh:mm OFF End of Fault n (only when Fault n has ended)
Menu 4-2 Cancel Messages
This displays the Alarms Cancelled! message.
Menu 4-3 Delete Messages
MESSAGES POS: XXXXX Entry
Delete !
Are you sure ?
No: ESC YES:
Safety prompt for deleting messages;
press ESC to exit after confirming or cancelling delete
, ESC