• Menu 1-2 Cooling Zone 1
COOLING 1 XXXXX
Cooling XXX Displays currentOFF/ON status of cooling
op.deg. Z 1 XX % Displays current valve opening degree Zone 1
OD med. 24h XX % Displays mean valve opening degree Zone 1 for past day
Temp. R4.1 XXX °C Displays current room air temperature Input Z21/Z22
Setpoint R4.1 XXX °C Displays room air temperature setpoint for comparison
Hystersis R4.1 XXX K Displays room air temperature hysteresis setpoint; shown only when on-off control
is set (Menu 2-1-1)
SH Z 1 XXX °C Displays current superheat temperature Zone 1
Heatg. Circuit XXX Displays current status of heating circuit control; shown only when single-zone
operation is set (Menu 6-1)
Ht. Cir. Setp. XXX °C Displays heating circuit control setpoint; shown only when single-zone operation is
set (Menu 6-1)
Ht. Cir. Hyst. XX K Displays heating cirucit control hysteresis; shown only when single-zone operation
is set (Menu 6-1)
sup air ctrl XXX Displays current OFF/ON status of supply or room air control
MOP op. XXX Displays OFF/ON setpoint of MOP mode
Status light XXX Status lighting control (ON/OFF)
Status hand XXX Status manual shutdown (ON/OFF)
To Next Page
Loading...
