Manufacturer’s Statement
Thank you for selecting the Ecotech Serinus® 10 Ozone Analyser.
The Serinus series is the next generation of Ecotech designed and manufactured gas analysers. The
Serinus® 10 will perform Ozone measurements over a range of 0 - 20 ppm with a lower detectable limit
of 0.5 ppb.
This User Manual provides a complete product description including operating instructions, calibration
and maintenance requirements for the Serinus® 10 Ozone Analyser. This manual is valid for the most
recent version of the Serinus® 10 which includes the new Auto ranging Power Supply, Main Controller
PCA and Rear Panel PCA.
Reference should also be made to the relevant local standards which should be used in conjunction
with this manual. Some of these standards are listed in this manual.
If, after reading this manual you have any questions or you are still unsure or unclear on any part of
the Serinus® 10, please do not hesitate to contact Ecotech or your local Ecotech distributor.
Notice
The information contained in this manual is subject to change without notice. Ecotech reserves the
right to make changes to equipment construction, design, specifications and/or procedures without
notification.
Copyright © 2021. All rights reserved. Reproduction of this manual, in any form, is prohibited without
the written consent of Ecotech Pty Ltd.
To Next Page
Loading...
