Ecotech Acoem Serinus 10 - Analyser State Menu; Figure 32 - Analyser State Menu Screen

Operation
Page 57
3.4.3 Analyser State Menu
Main Menu → Analyser State Menu
This displays the status of various parameters that affect instrument measurements.
Figure 32 – Analyser State Menu Screen
Status Menu
Refer to Section 3.4.4.
Temperature Menu
Refer to Section 3.4.5.
Pressure & Flow Menu
Refer to Section 3.4.6.
Voltage Menu
Refer to Section 3.4.7.
Model
This field will display the instrument model (e.g. Sernius 10).
Nominal Range
The measurement range of the instrument.
Ecotech ID
The Ecotech ID number.
Serial No.
The main controller PCA serial number.
Board Revision
The main controller PCA version.
Firmware Ver.
This field displays the firmware version currently in use on this
instrument. This can be important when performing diagnostics and
reporting back to the manufacturer.
Power Failure
This field displays the time and date of the last power failure or when
power was disconnected from the instrument.