Ecotech Acoem Serinus 10 - Figure 151 - Assemble Inner Slide on Chassis; Figure 152 - Rack Mount Ears Fitted to Instrument

Optional Extras
Page 175
3. Attach the inner slide rails to each side of the instrument using M4 x 10 button screws; three on
each side (refer to Figure 151).
Figure 151 – Assemble Inner Slide on Chassis
4. Install rack mount ears on the front of the instrument using two M4 x 10 screws on each side (refer
to Figure 152).
Figure 152 – Rack Mount Ears Fitted to Instrument