Ecotech Acoem Serinus 10 - Optional Extras and Parts Information; Optional Instrument Features

Optional Extras
Page 173
8. Optional Extras
This section contains information on optional kits and installed options:
Dual Sample Filter
Refer to Section 8.1.
Network Port
Refer to Section 8.2.
Rack Mount Kit
Refer to Section 8.3.
Internal Pump
Refer to Section 8.4.
Pressure Zero Valve
Refer to Section 8.5.
Internal Zero & Span
Refer to Section 8.6.
8.1 Dual Sample Filter (PN: E020100)
The dual filter is designed with two sample filters plumbed in parallel with a split line. This formation
allows sample flow not to be affected, yet reduces the loading on each filter and therefore the
frequency with which they will need to be changed.
The dual filter option is shown in the pneumatic diagram (dashed line) and requires no operational
changes to the instrument (refer to Section 9.5).
Figure 149 – Dual Filter Option Installed
8.2 Network Port (PN: E020101)
The network port option allows the user to setup and connect to a range of TCP/IP network options. If
the option is installed the user needs to make sure it is enabled in the Hardware Menu before the
feature can be used.
 Refer to Section 3.4.29, for details on the network menu.
 Refer to Section 4.3, for details on network setup.