Ecotech Acoem Serinus 10 - General Settings Menu; Figure 37 - General Settings Menu Screen

Serinus® 10 User Manual 3.2
Page 62
3.4.8 General Settings Menu
Figure 37 – General Settings Menu Screen
Main Menu → General Settings Menu
Decimal Places
Select the number of decimal places (0 - 5) used for the
concentration displayed on the home screen.
Conc. Units
Sets the concentration units (ppm, ppb, ppt, mg/m3, μg/m3 or
ng/m3).
Reference Temperature
[Gravimetric Units]
This option only appears if concentration units are set to
gravimetric (mg/m3, μg/m3 or ng/m3). Select either 0 °C, 20 °C or
25 °C. This sets the standard temperature used from conversion
for measured volumetric values.
Temperature Units
Select the units that temperature will be displayed in (Celsius,
Fahrenheit or Kelvin).
Pressure Units
Select the units that the pressure will be displayed in (torr, PSI,
mBar, ATM or kPa).
Flow Units
Select the units that the sample flow will be displayed in (slpm or
L/min).
Date
Displays the current date and allows users to edit if required.
Time
Displays the current time and allows users to edit if required.
Backlight
Select the length of time the screen and keypad backlight remain
on after a button press. The setting Always Off means the
backlight never turns on; the setting Always On means the
backlight never turns off.
Home Screen
This field allows the user to display concentrations on the Home
Screen in two formats. The first is Inst. only which displays only
the instantaneous concentration reading, the second is Inst & Avg
which displays both instantaneous and average concentration on
the Home Screen. The average is measured over the time period
set in Measurement Settings Menu (refer to Section 3.4.9).
Char 0 has Slash
When enabled, the instrument will display the zero character with
a slash (0) to differentiate it from a capital ‘O’.