Ecotech Acoem Serinus 10 - Service Menu; Figure 43 - Service Menu Screen

Operation
Page 69
3.4.14 Service Menu
Figure 43 – Service Menu Screen
Main Menu → Service Menu
Diagnostics Menu
Refer to Section 3.4.15.
Calculation Factors Menu
Refer to Section 3.4.22.
Load Auto-Backup Config.
Loads the auto-backup configuration file. The configuration is
automatically backed up every night at midnight.
Load Configuration
Loads a user selectable configuration file from the USB memory
stick.
Save Configuration
Saves all of the EEPROM-stored user-selectable instrument
configurations to the USB memory stick (calibration and
communication settings, units, instrument gain, etc.). If there are
problems with the instrument use this function to save settings to
the USB memory stick and send this file (together with the
parameter list save) to your supplier with your service enquiry.
Save Parameter List
Saves a text file of various parameters and calculation factors. If
the user has problems with the instrument use this function to
save settings to the USB memory stick and send this file (together
with the configuration save) to your supplier with your service
enquiry.
Instrument
This field allows the instrument to be set to either Online (normal
instrument operation) or In Maintenance (data is flagged as
invalid).
Next Service Due
Displays when the next scheduled service is due.
Safely Remove USB Stick
This command must be activated to safely remove the USB
memory stick.
System Restart
Activating this will restart the instrument.