Ecotech Acoem Serinus 10 - Manual Revision History; Table 2 - Manual Revision History

Serinus® 10 User Manual 3.2
Page 18
Manual Revision History
Manual PN: M010026
Current revision: 3.2
Date released: 18 February 2021
Description: User Manual for the Serinus® 10 Ozone Analyser
This manual is the full user manual for the Serinus® 10 Ozone Analyser. This manual contains all
relevant information on theory, specifications, installation, operation, maintenance and calibration.
Any information that cannot be found within this manual can be obtained by contacting Ecotech.
This manual uses cross reference links extensively throughout this manual. The hot keys below will
greatly reduce the amount of time scrolling between references:
 You can access the links by pressing the following:
CTRL + LEFT MOUSE CLICK: Move to the link location
 You can switch between links by pressing the following:
ALT + LEFT ARROW KEY: Returns you to previous Link
ALT + RIGHT ARROW KEY: Swaps back
Table 2 – Manual Revision History
Edition
Date
Summary
1.0
September 2008
Initial Release
1.1
December 2008
Menu updates and general corrections
1.2
March 2009
New maintenance procedures
Updated analyser setup
Small corrections
New menu items added
1.3
November 2009
Serinus downloader added
Internal pump option added
USB - Advanced Parameters updated
Minor corrections
1.4
September 2010
CE conformity added
Parts list updated
Pressurised zero valve added
Updates to rack mount option
Updates to Serinus downloader
Update to 25 pin I/O
Update to network communications