Ecotech Acoem Serinus 10 - Parts List and Schematics

Parts List and Schematics
Page 183
9. Parts List and Schematics
9.1 Serinus Accessories Kit
This kit contains assorted fittings, tubing and an orifice removal tool which are useful when working
on the instruments internal pneumatics. This is usually purchased with the instrument.
Table 16 – Serinus Accessories Kit H010136
Serinus Accessories Kit:
Part Numbers
Quantity
Fitting Nut 1/4T KYNAR Plug
036-130440-2
4
Fitting, Kynar, Union Tee 1/8 Barb - 400 Series
F030007-01
4
Fitting, Kynar, Union 1/8 Barb
F030008
2
Adaptor, 1/4" Fitting To 1/8" Barb
H010007
4
Adaptor,1/4" Tube To 1/8" Barb
H010008
2
Tool, Extraction Orifice and Filter
H010046
1
Cap, Black Rubber, 1/8
H030003
4
Cap, Black Rubber, 1/4
H030004
4
Tubing, 1/4" OD, 1/8" ID Black Norprene
T010021
3.3 ft
Tubing, K Flex, 1/4 X 1/8, Flexible Silicone W/ Kynar Lining
T010026
3 ft
9.2 Maintenance Kit
This maintenance kit is required when performing annual maintenance on the instrument. Depending
on the environment that the instrument is operating, this maintenance may need to be carried out
more often than yearly.
Table 17 – Serinus 10 Maintenance Kit - E020201
Serinus 10 Maintenance Kit: E020201
Part Number
Quantity
Filter Sintered SS
F010004
1
Spring, Compression, SS
H010062
1
Quartz Window 1/2
H013112
1
O-ring, BS112, 1/2ID X 3/32W
O010005
1
O-ring, VITON
O010008
1
O-ring 0.364ID X 0.070W
O010010
2
O-ring 0.114ID X 0.07W, VITON
O010012
1
O-ring, 5/32ID X 1/16W, BS007,
O010013
2
O-ring 1 11/16ID X 3/32W VITON
O010014
2
O-ring 1/4ID X 1/16W, VITON
O010015
2