7, P, Q, R, S, p, q, r, s
9, W, X, Y, Z, w, x, y, z
When editing a floating point number:
The key () inserts a negative sign if the editing cursor is at the start of the
number and negative signs are allowed. Otherwise it moves the decimal
place to the current cursor location.
inserts a positive sign if the cursor is at the start of the number; otherwise it
enters a space.
For non-floating point numbers:
These keys usually increment or decrement the current value by 1. When
editing the month field of a date, the (
) and () key change the month.
Instrument Status Light Buttons (4)
Located in the top left corner, these lights indicate the status of the instrument:
A red light indicates that the instrument has a major failure and is not functioning.
An orange light indicates there is a minor problem with the instrument, but the instrument may
still take measurements reliably.
A green light indicates that the instrument is working and there are no problems.
In the case of an orange or red light illuminated, go to the Status Menu to find which components are
failing (refer to Section 3.4.4) or press the orange or red light button to see the pop up box with a full
list of current faults.
Press the green status light button at any time to close any open edit box or menu and come back the
to the home screen.
If none of instrument status lights are ON and the keypad is backlit, this indicates that the instrument
is running the bootloader. The screen will also indicate that it is in bootloader menu.
To Next Page
Loading...
