C
HAPTER
23
| Authentication Commands
Web Server
– 826 –
EXAMPLE
Console(config)#ip http port 769
Console(config)#
RELATED COMMANDS
ip http server (826)
show system (711)
ip http server This command allows this device to be monitored or configured from a
browser. Use the no form to disable this function.
SYNTAX
[no] ip http server
DEFAULT SETTING
Enabled
COMMAND MODE
Global Configuration
EXAMPLE
Console(config)#ip http server
Console(config)#
RELATED COMMANDS
ip http port (825)
show system (711)
ip http secure-port This command specifies the UDP port number used for HTTPS connection to
the switch’s web interface. Use the no form to restore the default port.
SYNTAX
ip http secure-port port_number
no ip http secure-port
port_number – The UDP port used for HTTPS. (Range: 1-65535)
DEFAULT SETTING
443
COMMAND MODE
Global Configuration
To Next Page
Loading...
Need help?
General
