Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-26 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
AID
Description: This command is only available if the TL1 software option is installed in the
system. Displays the configuration of the access identifiers.
Command Level: 2
Syntax: AID, displays all AIDs
AID [n], where n is a number from 1 through 32 and specifies the specific
access identifier to be displayed
AI
AI [n]
Comments: Each access identifier can be viewed separately by entering the command
AID followed by a space and then a number from 1 through 32. The number specifies
which access identifier is to be displayed.
Notes: none
Related Commands: SET AID
Example:
Command<2>: AID 1
ACCESS IDENTIFIER 1 CONFIGURATION:
Name: P140B1
Type: EQPT
CHANNELS:
Chan Description Sub-access Identifier
A0001 Analog Channel 1 RECT1
A0002 Analog Channel 2 RECT2
A0003 Analog Channel 3 RECT3
A0004 Analog Channel 4 RECT4
___________________________________________________________________________________
Command<2>: AID
ACCESS IDENTIFIER 1 CONFIGURATION:
Name: P140B1
Type: EQPT
CHANNELS:
Chan Description Sub-access Identifier
A0001 Analog Channel 1 RECT1
A0002 Analog Channel 2 RECT2
A0003 Analog Channel 3 RECT3
A0004 Analog Channel 4 RECT4
ACCESS IDENTIFIER 2 CONFIGURATION:
Name: EMLIGHT
Type: ENV
CHANNELS: None
To Next Page
Loading...
Need help?
General
