User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-63
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Channel active (Y or N): Y
Name: Function Channel 1
Name:
Sub-access Identifier: FUNCTION1
Sub-access Identifier:
System Alarm Report mode: Y
System Alarm Report mode (Y or N):
Monitor type: DCVOLTS
Monitor type: DCAMPS
Monitor Value Format: Decimal
Set monitor value format to integer(I) or decimal(D): I
Limit 1 Enabled: Yes
Limit 1 Enabled (Y or N):
Limit 1 Value: 70.00
Limit 1 Value: 5000
Limit 1 Type: H
Limit 1 Type is High or Low (H or L):
Limit 1 Name: HVA2
Limit 1 Name: ABOVE 5000
Limit 1 Notification Code: MJ
Limit 1 Notification Code:
Limit 1 Service Effect Code: SA
Limit 1 Service Effect Code:
Limit 1 Alarm Class Number: 1
Condition Type: TOOHIGH
Condition Type:
Limit 1 Condition Description:
THIS VOLTAGE IS TOO HIGH
Condition Description:
THIS CURRENT IS TOO HIGH
Limit 2 Enabled: Yes
Limit 2 Enabled (Y or N):
Limit 2 Value: 60.00
Limit 2 Value: 4200
Limit 2 Type: H
Limit 2 Type is High or Low (H or L):
Limit 2 Name: HVA1
Limit 2 Name: ABOVE 4200
Limit 2 Notification Code: MJ
Limit 2 Notification Code:
Limit 2 Service Effect Code: SA
Limit 2 Service Effect Code:
Limit 2 Alarm Class Number: 1
Limit 3 Enabled: Yes
Limit 3 Enabled (Y or N):
Limit 3 Value: 50.00
Limit 3 Value: 500
Limit 3 Type: L
Limit 3 Type is High or Low (H or L):
Limit 3 Name: LVA1
Limit 3 Name: BELOW 500
Limit 3 Notification Code: MN
Limit 3 Notification Code:
Limit 3 Service Effect Code: NSA
Limit 3 Service Effect Code:
Limit 3 Alarm Class Number: 2
Condition Type: LOW
To Next Page
Loading...
Need help?
General
