Emerson LMS1000 User Manual

User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-65
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Condition Description:
THIS IS RELAY CHANNEL R01'S CONDITION DESCRIPTION
Condition Description:
Notification Code: CR
Notification Code:
Service Effect Code: SA
Service Effect Code:
Affected by ACO: N
Affected by ACO (Y or N): Y
Cycle Freq (min): 0
Cycle Freq (min):
Control Type:
Control Type:
Off Delay Time: 0s
Off Delay Tim:
On Delay Time: 0s
On Delay Time:
Save changes (Y or N): Y
Enter Program Line:
R01=B1|B2
___________________________________________________________________________________
Command<6>: CONFIG L0001
LED CHANNEL CONFIGURATION AS OF 07:35:00 ON 01/01/01.
Chan Description Act Alm Rpt Class Off-Dly-On
L0001 LED Channel 1 Y Y Y 0s 0s
Sub-access ID Ctrltype Condtype Ntfc Svef
LED1 AIRCOND HIGH CR SA
Condition Description
THIS IS LED CHANNEL L01'S CONDITION DESCRIPTION
CONTROL PROGRAM:
L0001=b0001
Channel active (Y or N): Y
Name: LED Channel 1
Name:
Sub-access Identifier: LED1
Sub-access Identifier:
Alarm Type: Y
Alarm Type (Y or N):
System Alarm Report mode: Y
System Alarm Report mode (Y or N):
Alarm Class Number: 0 2
Condition Type: HIGH
Condition Type:
Condition Description:
THIS IS LED CHANNEL L01'S CONDITION DESCRIPTION
Condition Description:
Notification Code: CR
Notification Code:
Service Effect Code: SA
Service Effect Code:
Control Type: AIRCOND
Control Type:
Off Delay Time: 0s
Off Delay Time:
On Delay Time: 0s
On Delay Time:

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English