Emerson LMS1000 User Manual

User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-149
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
[LVD 4B] [active]
___________________________________________________________________________________
Command<1>: SCAN V SYSTEM
VORTEX SYSTEM STATUS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description Value Units Alarm Status
A9001 Vortex System Voltage +50.3 VDC [None]
[High Voltage #1]
[High Voltage #2]
[Battery On Discharge]
[50% Battery On Discharge]
A9002 Vortex System Current +800 Amps [None/Overcurrent]
A9006 Vortex Shunt01 Current +200 Amps [None/Fail]
A9007 Vortex Shunt02 Current +200 Amps [None/Fail]
A9010 Vortex Shunt05 Current +200 Amps [None/Fail]
A9011 Vortex Shunt06 Current +200 Amps [None/Fail]
B9009 Vortex PCU Emergency Stop [None/Active]
B9024 Vortex PCU High AC Line [None/Active]
B9010 Vortex System Fuse [None/Active]
B9011 Vortex All AC Off [None/Active]
B9014 Vortex LVDs Inhibited [None/Active]
B9015 Vortex System Major [None/Active]
B9016 Vortex System Minor [None/Active]
___________________________________________________________________________________
Command<1>: SCAN V SUBSYSTEM
VORTEX SUBSYSTEM STATUS AS OF xx:xx:xx ON xx/xx/xx.
Chan Description Value Units Alarm Status
A9022 Vortex Subsystem Voltage +50.9 VDC [None]
[High Voltage]
[Low Voltage]
A9023 Vortex Subsystem Current +400 Amps [None/Overcurrent]
A9008 Vortex Shunt03 +200 Amps [None/Fail]
A9009 Vortex Shunt04 +200 Amps [None/Fail]
B9021 Vortex Subsystem Fuse [None/Active]
B9022 Vortex Subsystem Major [None/Active]
B9023 Vortex Subsystem Minor [None/Active]
___________________________________________________________________________________
Command<1>: SCAN V MCA
VORTEX MCA STATUS AS OF xx:xx:xx ON xx/xx/xx.
Description Alarm Status
Board Fail active
Shelf fuse active
A/D No System Voltage Input active
A/D No Sense Lead Voltage Input active
A/D No Subsystem Voltage Input active
Display Fail active
___________________________________________________________________________________
Command<1>: SCAN V LVD
VORTEX LVD STATUS AS OF xx:xx:xx ON xx/xx/xx.
Description Alarm Status
LVD 1A [inhibited/failed/active/inactive]
LVD 1B [inhibited/failed/active/inactive]
LVD 2A [inhibited/failed/active/inactive]
LVD 2B [inhibited/failed/active/inactive]

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English