Emerson LMS1000 User Manual

User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 3. Commands Page 3-233
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SET TIME
Description: Permits the setting of the system time.
Command Level: 3
Syntax: SET TIME
SE TI
Comments: The current time is displayed, and can be changed if desired by using the
format hh:mm:ss.
Notes: This command will affect the times associated with any statistics that may be
saved in memory. Also, any alarms that clear after the time is set will have the new time
stored as part of their log entry, which could be misleading. Any user changing the time
will have his name and this action recorded in the event log.
Related Commands: TIME
Example:
Command<3>: SET TIME
Time is 02:29:04.
Use Format HH:MM:SS

Emerson LMS1000 Specifications

General

Brand	Emerson
Model	LMS1000
Category	Measuring Instruments
Language	English