Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-234 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
SET TIMEOUT
Description: Defines the length of time that the system will remain on line without a
command, carriage return, or line feed being entered before terminating a
communications session.
Command Level: 6
Syntax: SET TIMEOUT
SE TIMEO
Comments: The timeout interval is programmable from 5 to 9999 seconds. The default
time is 5 minutes.
Notes: Any user changing the timeout period will have his name and this action
recorded in the event log.
The TL1 port has a session timeout feature which operates independently from the user
timeout feature.
Related Commands: TIMEOUT
Example:
Command<6>: SET TIMEOUT
User timeout: 300 seconds.
Enter new user timeout:
User timeout: 300 seconds.
To Next Page
Loading...
Need help?
General
