User Instructions Section 5847
Spec. Nos. 586505000 and 5865055000 (Model LMS1000) Issue AL, July 24, 2006
Chapter 2. Operating LMS1000 Page 2-25
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
LPS MCA Events: The following actions performed via LMS1000 or detected by
LMS1000 are recorded in the events log.
where, bb = bay number
cc = equipment number
ss = bay slot number
nnn = PCU capacity
dd = equipment element number
1) LPS local update inventory
2) LPS remote update inventory
3) LPS bay bb unknown added
4) LPS bay bb unknown deleted
5) LPS bay bb unknown moved
6) LPS bay bb unknown replaced
7) LPS MCA added
8) LPS MCA deleted
9) LPS MCA moved
10) LPS MCA replaced
11) LPS router bb-cc added
12) LPS router bb-cc deleted
13) LPS router bb-cc moved
14) LPS router bb-cc replaced
15) LPS nnnA PCU bb-cc added
16) LPS nnnA PCU bb-cc deleted
17) LPS nnnA PCU bb-cc moved
18) LPS nnnA PCU bb-cc replaced
19) LPS dist. bb-cc added
20) LPS dist. bb-cc deleted
21) LPS dist. bb-cc moved
22) LPS dist. bb-cc replaced
23) LPS RCB bb-ss added
24) LPS RCB bb-ss deleted
25) LPS RCB bb-ss moved
26) LPS RCB bb-ss replaced
27) LPS sys volts input changed
28) LPS temp. probe installed
29) LPS temp. probe removed
30) LPS temp. format changed
31) LPS MCA load A/B activated
32) LPS MCA load A/B deactivated
33) LPS dist. bb-cc LD B enabled
34) LPS dist. bb-cc LD A enabled
35) System float voltage set
36) System equalize/test voltage set
37) System high voltage shutdown set
38) System current limit set
39) System high voltage alarm #1 set
40) System high voltage alarm #2 set
41) System battery on discharge alarm set
42) System very low voltage alarm set
43) System total load current alarm set
44) System distribution A load current alarm set
45) System distribution B load current alarm set
46) NAG (audible alarm cutoff reset time period) minutes set
To Next Page
Loading...
Need help?
General
