Related information
Configure a Discrete Input
10.5 Print a standard ticket
You can print standard tickets using the display, or through a Discrete Input. You can also specify that tickets
will be printed automatically if a discrete event occurs. You may use as many of these methods as desired.
Procedure
To print standard tickets from the display, select the ticket from Menu > Operations > Printer > Print Ticket.
• Print None
• Print Process Screen
• Print Batch Ticket
• Print Config Data
• Print Alert History
• Print Active Alerts
• Print Audit Trail
• Print Test Page
• Print CT Totals (CT = custody transfer)
• Print CT Inventories
For examples, see Example tickets.
Note
Print Audit Trail and Print Config Data tickets are long prints.
10.6 Print a batch ticket
Batch tickets provide proof of batching operations.
Procedure
1. To manually print a batch ticket, go to the display and navigate to Menu > Batcher > Run Batch > Print
Batch Ticket.
2. To configure the transmitter to automatically print batch tickets after a batch end:
• From the display, navigate to Menu > Configuration > Inputs/Outputs > Channel E > Printer >
Ticket Settings.
• From ProLink III, navigate to Device Tools > Configuration > Batcher > Auto Print Ticket at Batch
End and select Yes.
3. You can also write a 1 to Modbus coil 383 to print a batch ticket.
Configure, wire, and use a printer for tickets Configuration and Use Manual
March 2019 MMI-20025166
180 Micro Motion Model 5700 Transmitters with Configurable Outputs
To Next Page
Loading...
