D Channel combinations
D.1 Rules for channel combinations
Use these rules to determine what channel types and channel combinations are valid on the transmitter.
Table D-1: Rules for channel combinations
Rule number Rule
1 Channel A is always mA Output 1.
2 Channel E is always RS-485.
3 Channel B can be mA Output 2, Frequency Output 2, or Discrete Output 1.
4 Channel C can be mA Output 3, Frequency Output 1, Discrete Output 2, or Discrete Input 1.
5 Channel D can be mA Input, Frequency Output 2, Discrete Output 3, Discrete Input 2, or
Frequency Input.
6 Both Channel B and Channel D can be configured as Frequency Output 2.
D.2 Valid combinations for channel configuration
The following table shows all valid combinations for channel configuration. Depending on your purchase
order, some channels may not be activated on your device.
Combination
Channel A Channel B Channel C Channel D Channel E
Combination 1 mA Output 1 mA Output 2 mA Output 3 Frequency Output
2
RS-485
Combination 2 mA Output 1 mA Output 2 mA Output 3 Discrete Output 3 RS-485
Combination 3 mA Output 1 mA Output 2 mA Output 3 Discrete Input 2 RS-485
Combination 4 mA Output 1 mA Output 2 mA Output 3 mA Input RS-485
Combination 5 mA Output 1 mA Output 2 mA Output 3 Frequency Input RS-485
Combination 6 mA Output 1 mA Output 2 Frequency Output
1
Frequency Output
2
RS-485
Combination 7 mA Output 1 mA Output 2 Frequency Output
1
Discrete Output 3 RS-485
Combination 8 mA Output 1 mA Output 2 Frequency Output
1
Discrete Input 2 RS-485
Combination 9 mA Output 1 mA Output 2 Frequency Output
1
mA Input RS-485
Combination 10 mA Output 1 mA Output 2 Frequency Output
1
Frequency Input RS-485
Combination 11 mA Output 1 mA Output 2 Discrete Output 2 Frequency Output
2
RS-485
Combination 12 mA Output 1 mA Output 2 Discrete Output 2 Discrete Output 3 RS-485
Configuration and Use Manual Channel combinations
MMI-20025166 March 2019
Configuration and Use Manual 337
To Next Page
Loading...
